CGC-75D is a 35 mm DIN-Rail mountable ground loop corrector with dc-separation and Tranzorb protection at the input.

Key Figures:
- Easy to install
- Dc-separation
- Tranzorb protection
- Affordable price

Installation:
Place the CGC-75D at the DIN-Rail, and connect the coax cable from the line to J1 and from the monitor to J2.
NOTE: - All specifications to be changed without notice.
- We make a reservation for any possible and unintended fault in the above text. In any matter of dispute, kindly
contact VIDATRONIC for further information.

Specifikationer:
Video input (by BNC Female): Max. 1.5 Vpp
Video output (by BNC Female): Vout = Vin Minus insertion loss
Insertion loss: =/> 0.5 dB / < 1 dB
Bandwidth: 30 Hz – 5 MHz - 3 dB
Max acceptable DC at the input: 4V
DC separation: Yes At the input
Tranzorb protection: Yes At the input, clamp =/> 10 V, w. bipolar function
Isolation voltage, primary to secondary: 500Vac
Temperature and environmental: 0 to 40 Degree Celsius @ max. 85% RH, NC.
Dimensions: 30 x 85 x 45 mm
Weight: 65 g
EMI / EMC: EN 61000-6-3, EN 50130-4