Beskrivelse:
CGC-75 is our new “in-line” ground loop corrector with dc-separation and Tranzorb protection at the input. The CGC-75 has
been established as a light weight version of the VGVS-75 but at the same time having the mentioned protection applied.

Key Figures:
- Easy to install
- Dc-separation
- Tranzorb protection
- Affordable price

Installation:
By using the “OUT” (Male) connector, simply connect the CGC-75 direct at the monitor or system video input connector, and
then connect the coax cable from the line to the “IN” (Female) connector.
NOTE: If direct connection to the monitor or system is not possible do to close-up mechanical reasons it is acceptable to
connect by means of an extension cable of up to max. 1 meter of RG.59 coax cable but preferable as short as
possible.

Specifications:
Video input (by BNC Female): Max. 1.5 Vpp
Video output (by BNC Male): Vout = Vin Minus insertion loss
Insertion loss: =/> 0.5 dB / < 1 dB
Bandwidth: 30 Hz – 5 MHz - 3 dB
Max acceptable DC at the input: 4V
DC separation: Yes At the input
Tranzorb protection: Yes At the input, clamp =/> 10 V, with bipolar function
Isolation voltage, primary to secondary: 500Vac
Temperature and environmental: 0 to 40 Degree Celsius @ max. 85% RH, NC.
Dimensions: 53 x 29 x 25 mm Excl. BNC connectors
Weight: 55 g
EMI / EMC: EN 61000-6-3, EN 50130-4